In this guide, we will identify some possible causes that can cause the Sandisk Cruzer write protect error, and then suggest possible recovery methods that you can try to fix the problem. The drive enters read-only mode to prevent data loss. There is no way to fix this problem. To check if the problem is with the flash drive and not your computer, we recommend plugging the USB drive into a different port on your computer. If possible, you should also test the drive on another computer.
ç® € ä½ “ä¸æ– ‡
æ— ¥ æœ¬èªž
SanDisk Write Protection Error And Its Causes
“I cannot delete or save images with a SanDisk SD card in my digital camera. So I needed a SanDisk recovery tool to fix this problem. When I did some work with Windows Disk Management, I encountered a read-only error. How do I remove the write protection from my SanDisk memory card? “
“I purchased a 128GB SanDisk Ultra USB 3.0 Flash Drive. However, when I tried to reformat it for other purposes, Windows said, “The hard drive is write protected. How do I remove write protection from Sandisk USB? Remove the USB stick and format? ”
“I cannot format my Sandisk USB drive because it is write protected. Is there a read-only Sandisk removal tool that can be used for formattingWhat’s the write-protected USB drive? ”
Sandisk is logging a secure error that usually occurs when trying to format a Sandisk storage device. This is a problem that has long troubled many users. What makes SanDisk devices read-only? Here are the main reasons you need to know and then find the right write protection removal tool to fix this error effectively:
SanDisk locked storage appears as read-only
The SanDisk device is infected with a virus or malware.
The device is encrypted with third-party write protection software.
The SanDisk device contains bad sectors.
Have you ever faced a similar issue with Sandisk write protection? Now this is no longer a problem. Use one of the tools listed below to remove SanDisk write protection. You can remove the write protection from the Sandisk device and then easily format it.
Prnotice. To reset the write protection error on your SanDisk device and turn the device back on, you must first use the write protection removal tools recommended in Part 1 and then format it. to the state found with the formatting utility in Part 2.
Comprehensive Solutions For SanDisk Read-only SD Card / USB Stick / SSD Problems
In general, the best way to fix SanDisk read-only error is to formatDevice. However, sometimes this does not work in disk management. So is there any other way to remove SanDisk write protection? You will receive a yes. Like this Show the two best ways to solve this problem: CMD commands and free recording with SanDisk.Protected format tool.
How do I write protect a SanDisk flash drive?
Insert your SanDisk USB drive / SD card / SSD into your Windows 7/8/10 PC, right-click the write-protected SanDisk USB / SD card / SSD and select Format Partition from the drop-down list. … 3. Enter a partition label, select File System for your SanDisk storage device and click OK.
How do I fix my SanDisk Cruzer flash drive?
Method 1: Change USB Port or Computer and Reconnect SanDisk Cruzer (1 minute)
Step 1. Change the USB port and reconnect the SanDisk Cruzer to your PC.
If the system still warns of an undetected error, go to step 2.
Step 2: Connect USB to another computer.
Step 3: Check if the SanDisk Cruzer is recognized.
Why does my SanDisk Cruzer not working?
A corrupted registry entry may prevent your SanDisk product from being recognized by your computer. Removing registry keys created during the installation of your SanDisk product may allow your computer to completely reinstall the device and fix the problem. 1. Disconnect the device from the USB port.
If your computer shows Fat32 format on Windows error, you need to check these recovery methods.
From the Start menu, type cmd and click the entry for the cmd program.
At the command prompt, enter diskpart (you may need to approve this as administrator).
Enter the disc list.
Enter Select Disk X, where X is the number of the disk you selected.
For some reason, the ability to format USB drives over 32GB using the FAT32 file system is not available in the standard Windows formatter. Here’s how to get around it.
CONNECTION: What file system should I use for my USB stick?
FAT32 is a reliable file system for external drives unless you plan on using files larger than 4 GB. If you want these large files, you’ll have to stick with something like NTFS or exFAT. The advantage of using FAT32 is portability. All major operating systems and most devices support it, making them ideal for drives that you need to access from different systems. The manufacturer’s claims of file systems in terms of disk size have created the myth that FAT32 can only be used to format disks between 2GB and 32GB. This is probably why native Windows tools and other systems use this limitation. Truth be told, FAT32 has a theoretical volume size limit of 16 TB, while the current practical limit is around 8 TB – a lot for most USB drives.operators.
We’re going to show you two ways to format larger USB sticks with FAT32. One method uses PowerShell (or command line) and the other uses a free third-party tool.
What Is A File System?
A file system is a standardized way of organizing data on a computer storage device, such as a flash drive or hard drive.
The file system divides the storage device into virtual compartments, like a wall of mailboxes, and keeps track of all the information stored in each mailbox.
Some of the most common file system formats for portable storage devices are FAT32, NTFS, and ExFAT.
Solution 1: Use Windows 10 FAT32 Formatter
to format to FAT32
USB Requirements: No
Unlike the tools built into Windows, a professional third-party FAT32 formatting tool for Windows 10 can make formatting to FAT32 simple and safe. We recommend that you try EaseUS Partition Magic with formatting function. Besides FAT32, it also supports for Available USB to NTFS, EXT2, EXT3 and ReFS.
Follow these simple steps to freely format USB to FAT32 on Windows 10:
Solution 2: Use File Explorer
to format Windows 10 as FAT32
USB Requirements: 32 GB or less. Otherwise, you can only format USB to NTFS.
Follow the three steps below to format a USB drive smaller than 32GB to FAT32 in Windows 10 Explorer:
Step 1: Connect your USB drive or external hard drive to your Windows 10 PC.
Step 2. Open File Explorer, locate your USB stick, right-click it and select “Format”.
Step 3. Set the destination file system to FAT32, enable “Quick Format” and click “Start” to start formatting.
When the process is complete, click “OK” to confirm. And now your USB drive is FAT32.
Solution 3: Format The USB / External Drive Using Disk Management To FAT32
USB Requirements: As with Explorer, your USB drive must be less than 32GB to be formatted as FAT32 in the program
For formatting to FAT32follow the three step instructions:
Step 1. In Windows 10, select This PC> Manage> Disk Management.
Step 2. Locate your USB drive or external hard drive and right-click it. Select “Format”.
Step 3. Set the USB file system to FAT32, check the “Perform quick format” checkbox and click “OK” to confirm.
Solution 4: Use Command Prompt
to format Windows 10 as FAT32
USB Requirements: No
Some power users or administrators prefer to use Command Prompts to perform certain operations on a Windows PC. It is also a convenient way to format a USB stick or external hard drive to FAT32 in Windows 10.
Note. Be careful using command lines on your PC to format your USB stick. Any wrong operation will cause serious problems.
Here you can find detailed information on how to use the CMD, DiskPart or PowerShell command line formatter:
Can Windows read fat32?
To format to FAT32, follow the three step instructions:
In Windows 10, select This PC> Management> Disk Management.
Find your USB stick or external hard drive and right click it. Choose a format.
Set the USB file system to FAT32, enable “Perform quick format” and click “OK” to confirm.
Can a 64gb USB be formatted to fat32?
Due to FAT32 limitations, Windows does not support creating a FAT32 partition on a hard disk partition larger than 32 GB. Therefore, you cannot directly format 64GB memory card or USB key to FAT32.
Common Reasons for Using a USB RAW Drive. The causes of the problem are clear and are as follows: Your access to the USB drive is denied. Your USB stick is not formatted or formatted incorrectly. The current file system of your USB drive is not recognized by your computer’s operating system.
This article is about RAW flash drives and how to fix them. Here you can find out:
Situations when your USB stick becomes RAW.
Top Reasons USB is RAW
How to recover files on a USB drive using RAW
How to perform RAW recovery from USB drive in NTFS / FAT format.
are you ready? To read!
Quick Knowledge: Why Is Your USB Stick Getting RAW?
A USB RAW drive is a drive with an unknown file system that is not recognized by the operating system. For this reason, you cannot access your data. Such RAW USB flash drive can be caused by file system corruption, virus attack, misconnection, and many other factors.
• Recover unrecognized USB devices
Not The Answer You Are Looking For? Answer Other Questions Using The Tag “USB Drive Repair” Or Ask Your Own Question.
You can try TestDisk (free, cross-platformand open source) – it works on just about any disk on the system, whether it’s internal or external. You can use TestDisk to overwrite any partition tables found on the disk. You can even find damaged or missing partitions and then repair the partition table.
You can also use TestDisk to simply recover files without rebuilding the partition table (if you just want to format and start over). TestDisk can also overwrite / repair MBR or boot sector if it is also damaged. I have successfully copied files from damaged partitions / drives.
Here are some simple steps to help you fix this problem. : difficult or impossible to reach, approach or understand: not available. For a complete definition of inaccessible, see the English Learner’s Dictionary. not available. Adjective.
Fix “Disk is not available” error on drive C, D, E, F or other partitions in Windows 10 / 8.1 / 8/7 without data loss. The error messages followed by the “Disk not available” prompt vary, but all solutions are described here. You don’t have to worry about losing your data because EaseUS Data Recovery Assistant can easily recover data from an inaccessible hard drive, USB stick or memory stick.
“Disk Unavailable” error quick fix:
Access Denied error message: Because you do not have permission to access the hard drive. To resolve this issue, you must take ownership of the permission in Windows Explorer / p>
Right-click an inaccessible hard drive and select Properties.
Go to the Security tab, click Advanced and click the Modify button.
On the Owner tab, change the owner of the specified account.
Sometimes hard drives, external hard drives, and USB drives get infected with viruses or suffer from power outages. In this case, the errorAnd “Disk not available” may appear unexpectedly and Windows will prevent you from accessing files and folders on your hard disk. For general troubleshooting of a disk partition that is currently lost access, a quick format can usually get it back on track. However, all data on the selected drive will be completely erased.
Since the disc cannot be opened at this time, you cannot save the data before formatting. Therefore, it is best to temporarily forget about this method and try other safe methods.
For some people who have already formatted hard drive and lost data, the first thing to do is download the EaseUS hard drive recovery program to recover the formatted partition data to avoid data overwriting. other operations.
What Is This Access Denied Error?
The error message indicates that there is a problem with the hard drive that has made the hard drive inaccessible. In the worst case, this can also lead to data loss.
If on external harddisk, the error message “Disk is not available. Access Denied ”, this usually means that you do not have permission to access the hard disk partition. To solve this problem, you need to own it to get permission.
How To Fix The Error “Disk Is Not Available. Access Denied “in Windows Explorer:
Step 1. Right-click an inaccessible hard drive and select Properties. Go to the Security tab and you should see the reason why you cannot open the disc with the information “You must have read permissions to view the properties of this object.” Click Advanced to continue. ” Then click on Advanced as shown.
Step 2. Click “Change” to try the process with administrator rights.
Step 3. When prompted to select a user or group, first select the Advanced option. Select Search General Queries Now to display a list of search results with usernames.
Windows typically adds four user groups to the security system, Excludes verified users, administrators, users and the system. If you just add administrators and system, you won’t be able to access the hard drive or even read its properties such as used space and free space. For this reason, you must add a user account for security.
Scroll down and find “Authenticated Users” by clicking “OK” to add them.
Tip. If you are not sure which section is missing from the security system, try adding several other names in the same way until you get the appropriate permission. Otherwise, select “Everyone” to allow unlimited access.
Step 4. Confirm saving the changes made. Go back to explorer and now my E drive is back to normal. I can open it without getting another error message.
How To Recover Data And Format Hard Drive To Fix Disk Inaccessibility. Access Denied Error:
If the properties of Windows Explorer can’t you Help, you can recover data from inaccessible hard drive and format the hard drive for recovery. EaseUS Data Recovery Wizard comes in handy when Windows detects your hard drive. Although you have lost access to your hard drive, it can help you scan and recover all data files, including items long lost from a hard drive that is not currently open. After the scan is complete, select the files to recover.
Download and run the EaseUS data recovery software.
Step 1. Run EaseUS Data Recovery Wizard on your computer. Select a hard drive that is no longer available on your PC. Click “Scan” to have the program scan and find the data on your hard drive.
Step 2. After scanning, you can view and check the found files in the scan results window. Click Filters to quickly find a specific file type. You can view the file by double clicking on it.
Step 3. Finally, select the items you want to recover and click “Recover.Update “. Choose a safe storage location (a second hard drive partition on your PC, or another external storage device). Then click OK to recover all lost data from the inaccessible hard drive.
When the data recovery is complete, go to My Computer or This PC, right-click the hard drive you want to recover, and select Format. In the pop-up window, you can set the file system and cluster size and then click OK.
Why is D drive not accessible?
An issue titled “Drive D: Not Available. Access Denied ”can occur with your solid state drive or hard drive from another computer, or because someone incorrectly changed the drive permission on them. Security Settings.
How do I fix USB Access Denied issue?
An issue titled “Drive D: Not Available”. Access Denied ”can happen to your solid state drive or hard drive on another computer, or because someone incorrectly changed the drive permission in the security settings.
Why is D drive not accessible?
A problem titled “Drive D: Not Available. Access Denied ”can occur with your solid state drive or hard drive from another computer, or because someone has incorrectly changed the drive permission on them. Security Settings.
Sometimes, your system may display an error indicating a USB storage format error. This error can be caused by a number of reasons.
Formatting a flash drive is the best way to prepare a USB drive for use by a computer. A storage system is created that organizes your data and at the same time frees up more storage space for additional storage space. This will ultimately optimize the performance of your stick.
You may encounter Windows Update 643 error code for many reasons, including software conflicts, malware infection, registry problems, and corrupted files.
The “USB storage device is not formatted” error appears on a Windows PC when an external USB storage device with a damaged or unrecognized file system is connected. The USB drive can be damaged or damaged as a result of misuse, malware or virus infection, sudden power failure, bad sectors, SMART errors, etc.
Windows also supports NTFS, FAT (FAT 16/32), exFAT and ReFS media. Any media or partition formatted using an unsupported file system will be recognized as RAW or damaged disk.
Therefore, Windows prompts you to format the media for use. By clicking the “Format” button, the damaged or logically damaged media can be repaired and prepared for use. All data contained in it will be irretrievably lost.
Therefore, try to repair the disk before clicking the “Format” button. In case of severe damage, you can use a data recovery tool like Stellar Data Recovery Professional to recover files from these software Damaged undetected and unsupported media and recover them with a few clicks for free use. data loss. Get the program now!
Basic Fact That Windows Cannot Finish Formatting The USB Drive
From time to time, you need to format your USB drive or SD card, but you get an error that Windows cannot format the drive. This error can occur for the following reasons:
Part 2: Format The USB Stick To Fix The Unformatted Error.
After data recovery, you can format the USB drive to fix the non-formatting error. The easiest way to format your USB drive is to use the free EaseUS partitioning tool. This free tool can easily format USB drives like Sandisk, Kingston, Panasonic, Lexar, Samsung, Sony, etc. in all complex cases. You can try the guide below to format your USB drive in a few easy steps.
Step 1. Select the USB drive to format.
Connect your USB storage device or USB storage device to your computer. Download and run the EaseUS partition software. Right-click the USB drive you want to format and select Format.
Step 2: set the drive letter and file system.
Give the selected partition a new partition label, a new file system (NTFS / FAT32 / EXT2 / EXT3) and a new cluster size, then click OK.
Step 3: Activate the alert box.
Click OK when the warning window appears. If you have important data, please make a backup beforehand.
Step 4: Apply changes.
First click the Action button, then Apply to format the USB drive.
How do I fix my USB stick not reading?
Method 4: reinstall the USB controllers.
Select Start, type Device Manager in the search box, and then select Device Manager.
Expand the Universal Serial Bus Controller. While holding the device (or right-click it), select Remove.
Then restart your computer. Your USB controller will be installed automatically.
Can you fix a corrupted USB stick?
CHKDSK CMD – Fixed file system error on USB. Step 3: Right click on “cmd. Exe ”, run it as administrator and enter“ chkdsk / X / f G: ”or“ chkdsk G: / f ”(replace G: with the drive letter corresponding to your USB key). The chkdsk process then starts repairing the damaged USB stick.
Why does my USB say it is formatting?
If the USB stick displays the same message on the computer you are connecting it to, the problem is probably in the file system structure on the USB stick. You can try to repair your USB drive by running chkdsk that I mentioned in method 4.