Troubleshoot And Resolve Windows Blue Screen Errors

 

If you’ve seen how to fix Windows blue screen errors, this blog post will help you.

Note the shutdown code on the Windows blue screen. …Try to fix your error code. …Review the latest changes to your computer. …Check for Windows and driver updates. …Perform a system restore. …Check for malware. …Check your computer hardware. …Perform an SFC scan.More Articles … • December 16, 2019

 

 

Notes:

  • You can also get hexadecimal error codes like 0x0000000A, 0x0000003B, 0x000000EF, 0x00000133, 0x000000D1, 0x1000007E, 0xC000021A, 0x0000007B, 0xC000000F, etc.

  • This article does not contain a list of all error codes. However, since many error codes have the same potential solutions, here are a few steps you can take to resolve the blue screen error.

  • What Is The Blue Screen Of Death?

    Blue Screen of Death (BSoD) indicates that Windows 10 has encountered a fatal system error and should be shut down immediately to avoid damaging the operating system. During this process, you will see a blue screen with a sad smiley face and a cryptic message: “Your computer has a problem and needs to be restarted. We just collect the error information and then reboot for you. ”

    In addition to this message, Windows 10 displays a generic error code. Although the code doesn’t know the cause or possible solution, it helps you to understand the problem at a superficial level.

    Today the corporationMicrosoft has verified and listed hundreds of stop error codes, ranging from the innocuous VIDEO_TDR_TIMEOUT_DETECTED in the CRITICAL_PROCESS_DIED directory.

    Fix Blue Screen With Restore Point

    If you do not have access to the desktop, do not allow the computer to start at least three times to start the automatic recovery environment, and then do the following:

    1. On the Choose an Option screen, select Troubleshoot.

    2. Click Advanced Options.
    3. Click System Restore.

    4. After restarting your computer, select your account and log in.
    5. Click Next.

    6. Typically, system restore points are created automatically when installednew update, new driver, or new application. You can also create a system restore point manually. Select the restore point that was created before the blue screen appeared.

    7. Click Next.
    8. Click Finish to apply the restore point.

    After completing these steps, System Restore will remove any updates and drivers configured after the restore point was created. This can help clear up the stop error.

    Fix Blue Screen In Safe Mode

    You can also uninstall an update or device driver in safe mode if you do not have access to the desktop.

    If you do not have access to the desktop, do not allow the computer to start at least three times to start the automatic recovery environment, and then do the following:

    1. On the Select an option screen, select Troubleshoot.

    2. Click Advanced Options.
    3. Click Launch Options.

    4. Click the Restart button.

    5. After restarting your computer, press F4 or key 4 to enter Safe Mode.

      how to fix windows blue screen error

    After entering Safe Mode, depending on the source of the problem, you can follow these steps to remove an update or device driver.

     

     

    How do I fix the blue screen of death on Windows 10?

    To enter Safe Mode to troubleshoot and fix blue screen errors in Windows 10, follow these steps:Click on the advanced launch option. …Click on the Troubleshoot option. …Click more options. …Click the Startup Options option. …Click the Restart button.More Articles … • November 12, 2020

    Why does my computer give a blue screen error?

    To fix Blue Screen of Death (BSoD) errors in Windows 7, you can try any of the following tips:Tip 1: System Restore.Tip 2: Install updates.Tip 3. Install the latest drivers.Tip 4. Check your hard drive for errors.Check for hard drive problems:Check for memory problems:Tip 5: get started repairing.Fix # 1: Hard Drive Cable.More Articles …

    How do you fix a blue screen loop?

    Restart your computer several times during boot. Now select Troubleshoot> Advanced options> Startup options and click the Restart button. After restarting the computer, a list of options appears. Select the option Disable driver signing application by pressing F7. October 3, 2018

     

     

     

     

    Easy Solution To Windows XP Problem An Error Occurred While Reading The Hard Disk. Problems

     

    It’s worth reading these repair guidelines when you get Windows XP. A hard disk read error message appears on your PC.

    What does hard disk read error mean? “An error occurred while reading the hard drive” is a common error that occurs and indicates that Windows detects a problem with the hard drive or that the hard drive is not reading. November 29, 2020

     

     

    Troubleshooting An error occurred while reading the hard drive in Windows XP, Windows Vista, Windows 7 and Windows 8.

    Why Is There A Hard Disk Read Error?

    The actual cause of this error varies from computer to computer, from hardware problems to software problems. This section lists the most common causes of hard drive read errors.

    Computer hard drive is failing

    In most cases, a failure to read from a hard drive indicates damage. If the boot sector on the hard disk is damaged or there are bad sectors in the system partition, the system boots with errors.

    No bootable hard drive

    Sometimes a hard drive read error before booting occurs because the computer is reading the wrong boot hard drive. If there is no bootable hard drive, or if the bootable hard drive is not configured correctly, the system will not boot normally.

    Damaged hard drive cable

    An IDE cable is a large piece of twisted cable in your computer casewhich is responsible for connecting the hard drive to the motherboard. Sometimes, incorrect or loose IDE cables can cause hard drive read or write errors.

    BIOS setup issue

    In rare cases, a hard disk read error occurs due to incorrect BIOS settings. If any BIOS updates are available, you should update them carefully.

    MBR corrupted

    Another common cause is incorrect or invalid setup of the Master Boot Recorder. Moreover, corrupted MBR configuration can be caused by virus attack, power outage, bad sectors, etc. In addition, incorrectly configured partition table can cause this problem.

    Sudden power failure

    An improper system shutdown can damage your computer’s files and hard drives. This usually happens when power is accidentally turned off or the system must be shut down to terminate a program that is not responding. After a computer crash, Windows checks the file system and hard drive at startup to ensure thatTrust and fix problem files.

    Operating system problem

    An incomplete or incorrect installation of Windows also leads to this problem; For example, if DLL files are missing on the system or some system registry files are damaged.

    “A Hard Disk Read Error Has Occurred” – How To Fix It?

    (25 positions)

    This message has been sent.

    Hello

    When I try to start Windows XP, I get the following message: “An error occurred while reading the hard drive on restart. Press Ctrl Alt = Del to restart. The same message appears on every reboot. Does anyone have any idea what to do? Try to fix this. I’ve been browsing the forums, but I’m a little confused by some of the suggestions. Any simple solution recommended would be appreciated.

    Thanks

    Reports: Published 8 years ago

    This message has been sent.

    The first thing I will do is

    chkdsk c: / r

    in cmd – for example from an installation CD. It wasabout as simple as possible.

    Reports: Published 8 years ago

    This message has been sent.

    hi and

    How do I access CMD? Each time you reboot, you will see the same message: “An error occurred while reading the hard disk. Press Ctrl Alt = Del to restart. “

    Reports: Published 8 years ago

    This message has been sent.
    windowsxp a disk read error occurred

    You need to boot the installation CD and access the recovery options.

    Reports: Published 8 years ago

    This message has been sent.

    Hello

    I found the original Windows XP installation disc, turned on the computer, and reinserted it several times. However, the same message is displayed: “An error occurred while reading from the floppy disk. Press Ctrl Alt = Del to restart your computer. ” Reboot tried to install the CD but got the same message. Any other idea would be appreciated.

    Reports: Published 8 years ago

    This message It has been sent.

    Do you see a boot option for entering BIOS? (F2) Change the first boot device to CD / DVD
    Another option is to press F12 during boot and change the boot order of the CD / DVD

    Mike

    Reports: ·Published 8 years ago

    This message has been sent.

    Yes, Mike is right. You forgot to change the boot order.

    Reports: ·Published 8 years ago

    This message has been sent.

    When I start my computer, I cannot access the BIOS. exactly the same message. I tried F12 several times at startup, but it didn’t make any difference.

    S.

    Reports: ·Published 8 years ago

    This message has been sent.

    stander2,

    You need to work quickly with the POST screen (BIOS), otherwise it will be outsourced to the operating system.

    What is your brand and model?

    Reports: ·Published 8 years ago

    This message has been sent.

    Hello GS! Thank you for your time. What do you mean by Fast POST?

    This is an Intel Pentium 4 computer, which is about 8 years old.

    Reports: Published 8 years ago

    This message has been sent.

    F2, ESC, or DEL, or the screen displays which key must be pressed to enter BIOS setup.

    Reports: Published 8 years ago

    This message has been sent.

    Hello

    I was able to access the BIOS utility – unfortunately I have to work here at AUS. After 9 hours there will be another crack. Thank you all.

    Reports: Published 8 years ago

    This message has been sent.

    Good day, buddy!

    Reports: Published 8 years ago

    This message has been sent.

    The Good Champion

    I have a Windows XP installation CD in the drive, I booted my computer while holding down the F2 key and now I am in BIOS setup and have Boot Device Priority and I have three boot device options – I have This third load is the input of the {4M-SAMSUNG CD-R / RW DRI} processor options and the input from F10 (save and exit). The PC restarts and continues to display this message. Shocking.

    Reports: ·Published 8 years ago

    This message has been sent.

    Hello, some successes – I think I have changed the boot priority of the PC to CD because now I get the message “Press any key to boot from CD”, I press any key and I get “The installer will check configuration of your computer’s hardware. “Wait, wait and that’s it, from there to a blank screen – nothing. No signs of life from my window. Tried several times and nothing. Nothing! Shitty house!

    Reports: ·Published 8 years ago

    This message has been sent.

    When changing the boot device parameters, was the 4M-SAMSUNG CD-R / RW-DRI first in the boot sequence (above the hard disk)? In some BIOSes, you need to use f5 / f6 or /- to move the highlighted selection up / down. You can find inFor information on changing / moving the boot sequence in the BIOS setup instructions (usually at the bottom of the menu).

    Edit: I did this 2 minutes late

    Reports: ·Published 8 years ago

    This message has been sent.

    Thanks to G41M, the boot device priority has been checked again and the first boot device is the Samsung CD and the second boot device is 3M = Maxtor (probably my hard drive). The third boot device is a floppy drive.

    Reports: ·Published 8 years ago

    This message has been sent.

    stander2, The hard drive or ribbon cable may be defective. The easiest way is to connect the drive as an external one to a running PC and run diagnostics from there.

    Reports: ·Published 8 years ago

    This message has been sent.

    Thanks buddy, I’m starting to think like you. This is an old drive that I have been doing for the most part, but there are a few things I was hoping to get pretty fast . Always be open to other ideas before you start.

     

     

    How do I fix a disk read error?

    Fixed: disk read errorPress Ctrl Alt Del to restart. “He was more interested in the data on the disk, and he was afraid that the hard disk would fail. …Unplug your USB or DVD drive. …Reset / update BIOS. …Rebuild MBR and fix startup. …Check the hard drive cables. …Check your RAM. …Try the player on a different computer. …Conclusion:

    How do you fix a hard disk error?

    If you are looking for ways to fix your hard drive problem, read on and you will get what you want.Use the System File Checker tool to fix the hard drive error. Type: cmd into the search bar and press Enter. …Run CHKDSK to fix the hard drive problem. …Use your partition manager software to check and fix hard drive / disk errors.December 11, 2020

     

     

     

     

    The Best Way To Fix Problems With Running Antivirus On A USB Drive

     

    If you ran an antivirus error message from a USB drive on your PC, check out these troubleshooting methods.

    Download antivirus software from the manufacturer’s website.The downloaded antivirus software will be saved on your hard drive.Plug in your USB drive and double-click the downloaded file to start the installation process.More Articles …

     

     

    Since portable antivirus software is usually not very large, it is easy to install it on a portable USB drive. This is useful for troubleshooting other computers or for transferring software from a work computer to an infected computer. You can use any of your favorite antivirus solutions or free antivirus software from AVG, Avira, or Malwarebytes. The download and launch process on your portable media is pretty much the same, regardless of the program. Microsoft Windows Defender Offline is a free security tool specially designed to work on a flash drive and clean up a damaged computer.

    Why use an anti-virus boot disk

    run antivirus from thumb drive

    Anti-Virus Boot Disks solve this problem by targeting malware outside of Windows. Boot your computer from an anti-virus CD or USB drive and load a dedicated operating system from the disc. Even if your Windows installation is completely infected with malware, noRedaction programs will not run on a dedicated operating system.

    This means that the antivirus program can be launched when installing Windows from the outside. The malware does not start while the antivirus is trying to remove it, so the antivirus can methodically find and remove malware without any intervention.

    Not all rootkits can tweak the tricks they use when they start Windows to hide them from the rest of the operating system. Antivirus software can view and remove rootkits.

    These tools are often referred to as hot spares. They are meant to be used when you need to rescue a desperately infected system.

    Recover Or Delete Infected Files

    After scanning your PC, the rescue disk will inform you of the results. When threats are detected, you can choose to remediate automatically (preferred method) or manual execution (alternative method).

    After restarting your computer, you can remove the external USB-CD / rescue disk drive.

    Follow these steps to start the rescue disk on your USB stick:

    Follow these steps to start the Rescue CD on the CD:

    1. Turn off your computer and insert the USB rescue disk into the USB port.
    2. Insert the Rescue CD into your PC’s CD / DVD drive and shut down your PC.
    3. Turn on your computer for scanning. When starting the PC, press the corresponding key to display the Start menu.
      • On the BIOS boot screen of your computer, look for text (usually the computer manufacturer’s logo and / or hardware initialization information that appears a few seconds before Windows starts) that shows you how to access the Start menu.
    4. Due to the large number of PC and BIOS manufacturers, there are many options for accessing the boot menu. Usually the keys are Esc, F12, or F11. Some PC models or manufacturers also use other keys like F10, F9, F8, or F5.
    5. After you have set the correct key for dosstupid to the start menu, restart your computer and press this key immediately.
  • When the Start menu appears, select the USB Rescue Disk. It can be listed as Removable media , USB stick , USB stick or something similar (sometimes listed in a submenu with another storage device .) moves.)
  • When the boot menu appears, select your rescue CD. It can be specified as CD-ROM , CD-ROM , CD / DVD / CD-RW ... or similar (sometimes in a submenu with other drives.)
  • Follow the instructions in the displayed message and press any key to start the rescue disk.
  • If you cannot access the Start menu, read the documentation for your PC on the manufacturer’s website or contact the manufacturer’s support.

    • On the BIOS boot screen of your computer, look for text (usually the computer manufacturer’s logo and / or initialization information And hardware that appears a few seconds before Windows starts), which shows you how to access the Start menu.
  • Due to the large number of PC and BIOS manufacturers, there are many options for accessing the boot menu. Usually the keys are Esc, F12 or F11. Some PC models or manufacturers also use other keys like F10, F9, F8, or F5.
  • After you have set the correct key to access the Start menu, restart your computer and press that key immediately.
    • Avast Premium Security 19.x
    • Avast Free Antivirus 19.x
    • Avast Omni 1.x
    • Avast Premier 19.x
  • Avast Internet Security 19.x
  • Avast Pro Antivirus 19.x
    • Microsoft Windows 10 Home / Professional / Business / Education – 32/64 bit
    • Microsoft Windows 8.1 / Pro / Enterprise – 32/64 bit
    • Microsoft Windows 8 / Pro / Enterprise – 32/64 bit
    • Microsoft Windows 7 Home Basic / Home Premium / Professional / Enterprise / Ultimate – Service Pack 2, 32/64 bit
    • Microsoft Windows Vista Home Basic / Home Premium / Business / Enterprise / Ultimate – Service Pack 2, 32/64 bit
    • Microsoft Windows XP Home / Professional / Media Center – Service Pack 3 32-bit

     

     

    How do I run a virus scan on a flash drive?

    After connecting the USB drive, open My Computer. Right-click on the USB icon and then left-click on “Scan for Viruses” from the drop-down menu. When launching the shell scanner, make sure the include subdirectory is checked and click the green start button (circled below).

    How do I make a bootable USB Antivirus?

    Boot your computer from the rescue diskTurn off the computer and insert the USB rescue disk into the USB port.Insert the Rescue CD into your PC’s CD / DVD drive and shut down your PC.Turn on your computer to scan. …When the Start menu appears, select the USB Rescue Disk.More Articles …

    What should I put on my emergency flash drive?

    So have a backup plan: a secure flash drive with your most important documents and details….Organize your dataA file called EMERGENCY (capital letters are important – you want to be opened first) with your name, address and nationality. …Credit card contact information file with the details of each card you have.More Articles … • August 4, 2012