Troubleshooting Tips For Converting NTFS To Fat32 Tip

 

Here are some simple steps you can follow to solve the problem of converting ntfs prompts to fat32. The first step is to launch Command Prompt by clicking Start> Programs> Accessories> Command Prompt. Then you can type convert d: / fs: fat32 at the command line (d: stands for the drive letter of the partition you want to convert. You can replace d: with a different drive letter if you want to convert another partition).

 

 

This article describes how to convert NTFS to FAT32 partition without formatting or losing data. 1 step to change partition from NTFS to FAT32 with free converter.

Applies to: Windows 10, Windows 8, Windows 7, Windows Vista, Windows XP, Windows Server 2019, Windows Server 2016, Windows Server 2012, Windows Server 2008, Windows Server 2003, Small Business Server (SBS) 2011/2008 / 2003.

NTFS and FAT32 are common file systems on Windows computers. Due to some of its advantages, NTFS is much more popular, regardless of how the hard disk partition is formatted itself or from OEMs. However, sometimes it is necessary to convert an NTFS partition to FAT32. Typical example: some USB or NTFS removable media are not recognized.

Many people own Mac laptops and Windows desktops. If you want to transfer files using a removable hard drive, the partitions on that hard drive must be formatted as FAT32. The NTFS partition can only be recognized by the Mac when a special utility is installed.

Information About FAT32 And NTFS Partitions

The File Allocation Table (FAT) file system was the primary file system in older statements.Microsoft’s ionic systems, and NTFS has largely replaced it. However, all versions of Windows still support FAT16 / 32, and this type of file system is often used on removable media.

FAT works like a chaining, and the operating system manages the hard drive by providing a map of the clusters (the basic units of logical memory on the hard drive). When you write a new file to your hard drive, the file is stored in one or more clusters that are not necessarily located next to each other. When you read a file, the operating system gets a list of files and finds the location of the file in a table, and then gets the entire data area and other information.

how to convert ntfs to fat32 command prompt

Files larger than 4 GB cannot be saved on a FAT32 partition.

NTFS (NT File System, also known as New Technology File System) is a new file system that appeared after FAT. As such, it offers several benefits, including:

  1. Use the B-tree directory schema to track file clusters.
  2. File cluster information and other data is stored in each clusterpere, not just in an authority table (e.g. FAT).
  3. Support for very large files (up to 16 billion bytes).
  4. An Access Control List (ACL) that a server administrator can use to control access to specific files.
  5. Built-in file compression.
  6. Support for Unicode-based names.
  7. Support for long filenames.
  8. Data security on removable media and hard drives

Change NTFS To FAT32 Using Diskpart And Other Native Tools

Sounds a little complicated, but converting NTFS to FAT32 partitions is very easy with free partition software such as NIUBI Partition Editor Free. If you don’t want to use third party software, you need to reformat this NTFS partition.

Formatting will destroy all data in this section. Therefore, be sure to make a backup or transfer files before doing this.

NTFS partitions larger than 32GB cannot be reformatted to FAT32 using the Windows built-in tool.

Windows can handle a FAT32 partition larger than 32GB, butit is not possible to create a FAT32 partition larger than 32 GB using all the built-in Windows tools, or an NTFS partition larger than 32 GB in FAT32 format. … To overcome this limitation, you need to run third party software.

If the NTFS partition you want to format to FAT32 is less than 32GB, there are four options.

4 ways to convert NTFS to FAT32 partition on Windows (destructive):

  1. Press Windows and R on your keyboard at the same time, type diskmgmt.msc and press Enter to open Disk Management. Right click on this NTFS partition and select Format.
  2. Press Windows and E at the same time to open Explorer, right-click on the NTFS partition and select Format.
  3. Press Windows and R, type cmd and press Enter, type the format / FS: FAT32 / Q. X: X is the drive letter of the NTFS partition and / Q stands for quick format.
  4. Run the diskpart command:

To convert NTFS to FAT32 (destructive) partition using diskpart command:

  1. Press Windows and R at the same time on your keyboard, type diskpart and press Enter.
  2. Enter a list of volumes andPress Enter at the diskpart command prompt window.
  3. Type select volume D and press Enter (D is the disk number or letter of the partition to convert to FAT32).
  4. Quickly type fs = FAT32 format and press Enter. (fast means fast formatting and is optional)

If you are formatting without quick mode, it can take from a few minutes to 10 minutes. As you can see, when formatting an NTFS partition larger than 32 GB, the FAT32 diskpart reports the error “Virtual Disk Service Error: Volume Too Large”.

If you format an NTFS partition larger than 32GB using Disk Management or File Explorer, FAT32 will not be available as an option.

For comparison, a 32GB NTFS partition can be converted to FAT32 without any problems.

If you want to convert NTFS to FAT32 partition without formatting or data loss, follow these steps.

Convert NTFS To FAT32 Partition With Free Converter

In NIUBI Section Editor, it only takes 3 clicks to complete the conversion. There is no partition size limit and conversion can be done instantly Okay. Free version is available for Windows 10, 8, 7, Vista, XP (32/64 bit).

Download the NIUBI Partition Editor, right-click any NTFS partition (except System Reserved, System C: and Minor OEM) and select Convert to FAT32.

Click “OK” to confirm.

Click “Apply” in the upper left corner to complete the execution. (Any operations performed before clicking the Apply button will only work in virtual mode, and the real partitions of the hard disk will not be modified.)

Watch the video on how to convert NTFS to FAT32 using NIUBI:

At A Glance

Windows built-in tool including disk management, cmd and diskpart command cannot convert NTFS partition larger than 32GB to FAT32 or 32GB NTFS partition. After that, all files will be lost. reformatting. With NIUBI Partition Editor Free, you can quickly and easily convert NTFS to FAT32 partitions without data loss.

It also helps to convert MBR disk to GPT and convert primary partition to logical. Shrink, expand, move and combineCreate partitions to optimize disk space usage, clone hard drives / partitions for operating system and data migration, defragment, delete, hide partitions, scan bad sectors and more.

DOWNLOAD

NTFS partitions larger than 32GB cannot be reformatted to FAT32 using the Windows built-in tool.

Windows can handle a FAT32 partition larger than 32 GB, but it is not possible to create a FAT32 partition larger than 32 GB using all Windows built-in tools, or to create an NTFS partition larger than 32 GB in FAT32 format. To overcome this limitation, you need to run third party software.

What’s The Best Way To Convert FAT32 To NTFS Windows 10?

You have three options for converting FAT32 to NTFS Windows 10:

1. EaseUS Partition Master: With this partition and hard drive converter, you can convert FAT32 to NTFS or NTFS to FAT32 without formatting or data loss. Moreover, it has extensive disk management functions that can help you organize your hard drive efficiently andimprove system performance.

2. Command line. You can convert FAT32 to NTFS using CMD without additional software. However, the main disadvantage of this approach is that only the file system can be changed from FAT32 to NTFS and the reverse conversion is not possible.

3. Disk Management: This is a very useful pre-installed tool for disk management in Windows 7/8/10. It can convert FAT32 to NTFS by formatting. If you don’t back up any data first, there is a risk of data loss.

Method 1. Convert NTFS To FAT32 With EaseUS Partition Master

Suitable for: Novice Windows users

Difficulty level: very easy

Capacity Limit: No

The easiest way is to use a third party NTFS for FAT32 format tool. With Magic Tool for EaseUS Partitions, you can do this easily. It is a powerful tool to change the file system from NTFS to FAT32.

The program works great on Windows 10, 8, 8.1, 7, XP and Vista. It’s not just about formatting an NTFS device to FAT32. It also supports:

  • Support dOther file systems including exFAT, FAT16, Ext2 / 3/4, etc.
  • Support for converting FAT / FAT32 to NTFS without formatting, no data loss.
  • Supports unlimited formatting from UBS 64/128 GB to FAT32.
  • Supports advanced features such as resizing a partition, converting hard disk to MBR / GPT, transferring an operating system, etc.

After saving the data, you can start converting NTFS to FAT32 by formatting your device. Here are the steps:

Method 2. Change NTFS to FA.

 

 

How can I change NTFS to fat32 without formatting?

Convert NTFS to FAT32 without hard disk formatting using free software
  1. Install and run the free AOMEI software. On the left, click All Tools> NTFS to FAT32 Converter.
  2. Select the type of conversion. Here you need to select NTFS to FAT32.
  3. Select NTFS partition from the list.
  4. Review the process and click Next.

How do I format my hard drive to fat32 using command prompt?

Manually force Windows to format FAT32
  1. From the Start menu, type cmd and click the entry for the cmd program.
  2. At the command prompt, enter diskpart (you may need to approve this as administrator).
  3. Enter the disc list.
  4. Enter Select Disk X, where X is the number of the disk you selected.
  5. Enter clean.

How do I convert fat32 to NTFS?

All you have to do is right-click on the drive and select Format. Then select NTFS from the file system dropdown list. Exit format and copy your data. Friendly and easy.