How To Enable Fat32 Format In Windows?

 

If your computer shows Fat32 format on Windows error, you need to check these recovery methods.

  1. From the Start menu, type cmd and click the entry for the cmd program.
  2. At the command prompt, enter diskpart (you may need to approve this as administrator).
  3. Enter the disc list.
  4. Enter Select Disk X, where X is the number of the disk you selected.
  5. Enter clean.

 

 

fat32 format in windows

For some reason, the ability to format USB drives over 32GB using the FAT32 file system is not available in the standard Windows formatter. Here’s how to get around it.

CONNECTION: What file system should I use for my USB stick?

FAT32 is a reliable file system for external drives unless you plan on using files larger than 4 GB. If you want these large files, you’ll have to stick with something like NTFS or exFAT. The advantage of using FAT32 is portability. All major operating systems and most devices support it, making them ideal for drives that you need to access from different systems. The manufacturer’s claims of file systems in terms of disk size have created the myth that FAT32 can only be used to format disks between 2GB and 32GB. This is probably why native Windows tools and other systems use this limitation. Truth be told, FAT32 has a theoretical volume size limit of 16 TB, while the current practical limit is around 8 TB – a lot for most USB drives.operators.

We’re going to show you two ways to format larger USB sticks with FAT32. One method uses PowerShell (or command line) and the other uses a free third-party tool.

What Is A File System?

A file system is a standardized way of organizing data on a computer storage device, such as a flash drive or hard drive.

The file system divides the storage device into virtual compartments, like a wall of mailboxes, and keeps track of all the information stored in each mailbox.

Some of the most common file system formats for portable storage devices are FAT32, NTFS, and ExFAT.

Solution 1: Use Windows 10 FAT32 Formatter

to format to FAT32

USB Requirements: No

Unlike the tools built into Windows, a professional third-party FAT32 formatting tool for Windows 10 can make formatting to FAT32 simple and safe. We recommend that you try EaseUS Partition Magic with formatting function. Besides FAT32, it also supports for Available USB to NTFS, EXT2, EXT3 and ReFS.

Follow these simple steps to freely format USB to FAT32 on Windows 10:

Solution 2: Use File Explorer

to format Windows 10 as FAT32

USB Requirements: 32 GB or less. Otherwise, you can only format USB to NTFS.

Follow the three steps below to format a USB drive smaller than 32GB to FAT32 in Windows 10 Explorer:

Step 1: Connect your USB drive or external hard drive to your Windows 10 PC.

Step 2. Open File Explorer, locate your USB stick, right-click it and select “Format”.

Step 3. Set the destination file system to FAT32, enable “Quick Format” and click “Start” to start formatting.

When the process is complete, click “OK” to confirm. And now your USB drive is FAT32.

Solution 3: Format The USB / External Drive Using Disk Management To FAT32

USB Requirements: As with Explorer, your USB drive must be less than 32GB to be formatted as FAT32 in the program

For formatting to FAT32follow the three step instructions:

Step 1. In Windows 10, select This PC> Manage> Disk Management.

Step 2. Locate your USB drive or external hard drive and right-click it. Select “Format”.

Step 3. Set the USB file system to FAT32, check the “Perform quick format” checkbox and click “OK” to confirm.

Solution 4: Use Command Prompt

to format Windows 10 as FAT32

USB Requirements: No

Some power users or administrators prefer to use Command Prompts to perform certain operations on a Windows PC. It is also a convenient way to format a USB stick or external hard drive to FAT32 in Windows 10.

Note. Be careful using command lines on your PC to format your USB stick. Any wrong operation will cause serious problems.

Here you can find detailed information on how to use the CMD, DiskPart or PowerShell command line formatter:

 

 

Can Windows read fat32?

To format to FAT32, follow the three step instructions:
  1. In Windows 10, select This PC> Management> Disk Management.
  2. Find your USB stick or external hard drive and right click it. Choose a format.
  3. Set the USB file system to FAT32, enable “Perform quick format” and click “OK” to confirm.

Can a 64gb USB be formatted to fat32?

Due to FAT32 limitations, Windows does not support creating a FAT32 partition on a hard disk partition larger than 32 GB. Therefore, you cannot directly format 64GB memory card or USB key to FAT32.