If you’re getting Kodak error 3508, today’s User’s Guide is here to help you.
The malfunction is caused by the cartridge being unable to contact the electrical points between the cartridge and the carriage head.
The Kodak printer displays an out of ink error message when it detects that a cartridge is low on ink. It does not print if an ink cartridge is detected. If you refilled a cartridge or want to clear the Kodak printer’s “Out of ink” message, you must reset the cartridge to continue printing. There are special ink cartridge reset devices that tell the Kodak printer that the cartridge is full even when it is empty.
Open the cover of the Kodak printer. Remove the ink cartridges from the printer.
Wipe the ink cartridges with a cotton swab and alcohol to remove ink marks on the metal connectors. Wait about a minute for the rubbing alcohol to dry on the cartridge.
Insert the ink cartridge into the chip reset tool.
Hold the button at the top of the chip reset for three seconds to reset the ink counter. A green light should indicate that the cartridge has been discarded.
Remove the chip reset cartridge and reinsert it To your Kodak printer. The printer should recognize the cartridge as full and print as normal.
Susan Reynolds has been writing since 2008. She received her BA in English from the University of South Florida. licensed real estate agent in Florida.
Kodak ESP contains an internal memory chip that gives you information about the status of your printer, including the amount of ink remaining in each cartridge. While ink levels shown in the printer’s built-in display service menu are generally correct, chip errors can occur that result in incorrect readings. You can reset the printer to display the correct ink level by turning the power off and then back off.
Open the inner compartment to access the cartridges.
Remove both cartridges from the printer.
Turn off the printer, wait about five seconds, and then turn on the printer again. This will delete the previous read of cartridges from the device’s internal memory.
Replace the inkcartridges, turn off the printer, and then restart it after five seconds.
Open the Maintenance menu on the printer’s built-in display and confirm the ink reading in the Check Ink Levels option.
Charlotte Mission is an avid reader and author. She has been writing professionally and for fun for over 5 years. His work has been published on eHow.com and AssociatedContent.com. She is currently studying history.